B.Tech in Plastic and Polymer Engineering Course, Jobs and Salary 

Pranjal Singhal's profile photo

Pranjal Singhal

Content Curator

B.Tech in Plastic and Polymer Engineering is a recognized UG program which involves theoretical and laboratory exercises. This 4- year course is for students who have passed 10+2 from a recognized educational Board like CBSE/ICSE with Physics, Chemistry, English and Math as the core subjects.

A range of colleges offering the course shortlist students by conducting their own common entrance tests such as IIT (Joint Entrance Examinations) JEE Main. There is also a provision of lateral entry to the course. The average fee for the course lies between INR 2 lacs to 5 lacs annually, but this figure depends upon the college. Students are taught about polymer and plastic designing, manufacturing, production, supplying as well as several other related things.

Offering a comprehensive insight into the polymer and plastic industry, the course provides higher education options as well, such as M. Tech and Ph.D. The initial salary ranges between INR 15,000 to 25,000 p.m. depending upon the candidate’s qualification, designation, and sector of employment. Students who look forward to a career in production engineering, quality inspection or plastic, and polymer specialization would be ideally suited to the course. The reputed petroleum and natural gas organizations like ONGC, OIL and more hire such engineers.

Top Colleges for Bachelor of Technology [B.Tech] (Plastic and Polymer Engineering)

B.Tech in Plastic and Polymer Engineering: Course Highlights

Name of the course Bachelor of Technology in Plastic and Polymer Engineering
Duration of the course 4 years
Stream Science
Average course fee INR 2 Lakhs annually
Sectors of Employment Government/ Public and Private 
Average entry-level salary INR 15,000 – 20,000 pm
Top entrance exams CET, JEE Main
Top recruiters Ministry of Petroleum, Natural Gas, Oil India Laboratory, Petrochemical Engineers Plants, Indian Institute Of Petroleum, Oil and Natural Gas Corporation (ONGC

B.Tech in Plastic and Polymer Engineering: What Is the Course About?

B. Tech in Plastic and Polymer Engineering is about an advanced awareness of chemicals, plant design, production and uses of polymer, production designing, and related fields.

With a rapid growth in material industries today, work opportunities for polymer and plastic engineers are increasing.    

B.Tech in Plastic and Polymer Engineering: Skills Required

Applicants with strong communication skills and interest and skills in R&D and Quality Control are fit for B. Tech in Plastic and Polymer Engineering.

Duration:

Like other undergraduate engineering degree courses, B. Tech in Plastic and Polymer Engineering also lasts 4 years and 8 semesters. It runs on a semester scheme wherein examinations are held in every 6 months. 

Top Institutes Offering B. Tech in Plastic and Polymer Engineering

College State Fees in INR
GS Mandal Marathwada Institute of Technology (MIT) Aurangabad, Maharashtra 3.1 lacs
Institute of Chemical Technology (ICT) Mumbai, Maharashtra 1.78 lacs
Laxminarayan Institute of Technology (LIT) Nagpur, Maharashtra 1.8 lacs
College of Engineering Roorkee Roorkee, Uttarakhand 4 lacs

Eligibility for B.Tech in Plastic and Polymer Engineering:

Applicants need to secure at least 55% in aggregate at the +2 level from a recognized educational Board. Also, the CET [J.E.E Main (especially for IIT)] needs to be cleared for admission. Candidates clearing the entrance test are eligible for taking admission to the course.

B.Tech in Plastic and Polymer Engineering: Admission Process

For admission, students need to fill the admission form, take the relevant entrance paper and qualify it. Attested documents (mark sheets, admit card, photographs, copy of JEE/CET and other hobby or sports certificates) need to be submitted with the fee. Students are shortlisted based on the obtained score.

Distance Education:

There is the option of pursuing the course via distance education from a few colleges/ universities such as the IIPS (Indian Institute of Polymer Science). Examinations conducted under the distance learning course are not held semester- wise but annually.

Lateral Entry:

Students having scored at least 50% in aggregate in the XII standard with science subjects and having subsequently pursued a 1 year diploma course are considered eligible for lateral entry to this course.

Some colleges like BIT (Ranchi), Central Institute of Plastics Engineering and Technology (Chennai), and Delhi Technological University make this provision.

B.Tech in Plastic and Polymer Engineering: Career Prospects

Successful graduates of B. Tech in Plastic and Polymer Engineering are hired in capacities like Plastic Specialist, Polymer Specialist, Quality Control Inspector, Marketing Executive, and Technology or Production Engineer. A list of such prospective sectors and corresponding job positions are listed here.

Sector Positions
Manufacturing and Industry Production Supervisor, Quality Inspector, Production Manager
Public and Pvt. Sector Electronic, Power and Manufacturing Industries
Development and Research Center Laboratories, ONGC Plant Engineer, Technical Support, Quality Controller

B.Tech in Plastic and Polymer Engineering: Job Vacancies

A list of industries offering employment opportunities to successful graduates of B. Tech in Plastic and Polymer Engineering are listed here along with the available vacancies therein.

Industries for Employment Vacancies
Aerospace Product and Parts Manufacturing 3530
Architectural, Engineering, and Related Services 3100
Semiconductor and Other Electronic Component Manufacturing 2320
Scientific Research and Development Services 1880
Federal Executive Branch (OES Designation) 1330

Listed here are the potential salaries offered for the many designations on offer after B. Tech in Plastic and Polymer Engineering

annual salary graph
Designation Experience Salary (INR, p.a.)
Product Designer Trainee 0-1 years 2,50,000 to 4,75,000
Jr. Technical Plastic Engineer 2- 5 years 3,00,000 to 4,00,000
Plastic Industrial Engineer 2- 5 years 3,00,000 to 6,50,000
Utility Polymer/Plastic Engineer 2- 7 years 2,50,000 to 7,00,000
Plastic Production Engineer 3- 8 years 2,00,000 to 4,00,000
Mould Maintenance 6- 11 years 9,00,000 to 10,00,000
Injection Molding Plastic Engineer 6- 11 years 9,00,000 to 12,00,000

B.Tech in Plastic and Polymer Engineering: Course Structure

A semester- wise breakup of the course’s syllabus is given here for candidates’ reference.

SUBJECTS Objective
Semester I Throwing light on Polymers Physical Properties and required polymers for designing products
The Plastics Industry -
Polymer Processing Survey – Lecture and Lab -
Plastics and Elastomers -
Polymer Testing Lab -
Information, Technology, and Society -
Humanities Elective/ Social Science Elective/ Art Elective / Foreign Language Elective/ Applied Arts Elective / International Field Experience Elective -
Semester II Learning about manufacturing, compositions, Mathematics andCchemistry.
Sustainable Materials -
Composites and Nano-composites -
General Chemistry I -
College Algebra and Trigonometry I -
English Composition I -
Semester III Basic understanding, Moulds Designing and Manufacturing
Extrusion -
Blow Molding -
Manufacturing Processes and Tool making Survey -
Technical and Professional Communication -
College Algebra and Trigonometry II -
Semester IV Learning Maintenance, Molding, and Spinning Principles or Techniques,
Tooling Maintenance -
Injection Molding -
Rotational Molding -
Thermoforming -
Quality Principles -
Applied Calculus / Calculus I -
Semester V Learn how to design polymer products with their properties and usage
Advanced Extrusion -
Mechanical Properties and Testing -
Polymer Synthesis and Formulation -
Polymer Synthesis Lab -
Plastics Formulation Lab -
Fundamentals of Speech -
Cultural Diversity Elective -
Semester VI Study of Process, Planning, Effects and Characteristics
Advanced Blow Molding -
Plastic Part Design -
CIM and Automation in Plastics Processing -
Project Management and Capstone Planning -
Physics/Chemistry Elective -
Semester VII Real-time Composite Molds Production 
Advanced Injection Molding -
Mold and Die Design -
Designing Molds and Dies -
Building Molds and Dies -
Plastics Engineering Technology Senior Project -
The Principles of Macroeconomics -
Elective paper (Art) -
Semester VIII Carrying out Laboratory Practices, Practicing for Superior Establishment, Training and Career Advancement
Advanced Thermoforming and Rotational Molding -
Mold flow -
Engineering Ethics and Legal Issues -
Humanities Elective -
Open Elective / Associate -

Bachelor of Technology [B.Tech] (Plastic and Polymer Engineering) Fee Structure in India


1 L (Minimum Fee)PUBLIC COLLEGES1.34 L  (Maximum Fee)
1.17 L (Average Fee)
3.41 L (Minimum Fee)Private COLLEGES5.21 L (Maximum Fee)
4.07 L (Average Fee)

Bachelor of Technology [B.Tech] (Plastic and Polymer Engineering) Fee Structure By state


Maharashtra

1 LPUBLIC COLLEGES1.34 L
1.17 L
3.41 LPrivate COLLEGES3.60 L
3.51 L

Comments



No Comments To Show

Bachelor of Technology [B.Tech] (Plastic and Polymer Engineering) Colleges IN INDIA

View All
85.35 K first year fees
VIEW ALL COURSES & FEES
33.6 K first year fees
VIEW ALL COURSES & FEES
90 K first year fees
VIEW ALL COURSES & FEES
1.42 L first year fees
VIEW ALL COURSES & FEES