Master of Technology in Rubber Technology Colleges, Syllabus Scope and Salary

Sakshi Gupta's profile photo

Sakshi Gupta

Content Curator

Stream: Engineering          
2 Years

Course: Rubber Technology          
Course Type: Post Graduation

M. Tech. in Rubber Technology is a 2- year long course divided into 4 semesters, with each semester lasting a period of 6 months. Rubber Technology is a specialized branch of engineering that involves the transformation of rubbers, elastomers, latex, natural rubber, synthetic rubber into useful products such as automobile tires, rubber mats, and exercise rubber stretching bands.

The course includes an advanced study of the various types of rubbers, their properties, and descriptions of formulation of rubber compounds. The methods involved in the processing of rubber are vulcanization, mastication, and calendering. The program consists of components of study such as processing technology, manufacture of latex products, non- tyre rubber products, tyres, testing and specification of rubber, latex products, materials science, organic chemistry, basics of polymers, rubber compounding, adhesives and surface coatings, plastic materials, and many more such relevant areas.

The average annual course fee in India ranges between INR 1 and 3 Lacs, depending upon the institute offering the course. The basic eligibility criterion to pursue the course is graduation (B.Tech.) completed in any engineering discipline with a minimum aggregate score of 55% or equivalent CGPA, from a recognized university. For availing admission to M.Tech. colleges, applicants need to appear for the GATE, and qualify it with a valid score. The admission process also includes an additional round of interview.

The average annual starting salary offered in India to successful postgraduates of the course ranges between INR 3 and 8 Lacs, depending upon the candidate’s expertise in the field.

M.Tech. in Rubber Technology: Course Highlights

Listed below are some of the major highlights of the course.

Course Level Post-graduate
Duration Two Years (full time)
Examination Type Semester System
Eligibility Graduation from a recognized university with 55% marks in aggregate
Admission Process Counselling after taking entrance examination, preferably GATE
Course Fee INR 1 to 3 Lacs
Average Starting Salary INR 3 to 8 Lacs
Top Recruiting Fields/Areas HLL Life Care Limited, ISRO, DRDO, MRF Ltd., CEAT Tyres, Apollo Tyres, Ashok Rubber Industries, Gas Authority of India Limited, HCL Technologies, Madras Rubber Factory, Jayashree Polymers Group, L.M. Fibres, Saint Gobain Industries, TVS Motors, Rubco, Haldia Petrochemicals, Hi Tech Carbon, etc.

M.Tech. in Rubber Technology: What is it About?

The course explores on an advanced level, the technical aspects of rubber processing and core subjects like adhesion technology, rubber processing principles, rheology, and foam technology. It covers the concepts and processes involved in the processing and manufacturing of latex and other rubber products which when molded, are transformed into a variety of required shapes such as toys, garments, stationeries, accessories such as bands, musical instruments, automobile parts for ease compression, washers, and other such items.

One of the most significant uses of rubber technology is in the manufacturing process of tyres which are used in different type of vehicles ranging from a plane to a bicycle. Treated or processed rubber is also used by various industries as an end product, such as for car decoration etc. With a constant increase in automobile- manufacture, there is an increasing demand of rubber in industries, thus making rubber technology a lucrative career option.

Top Institutes Offering M. Tech. in Rubber Technology

Listed below are some of the top institutes offering the course in the country with the corresponding locations and fees charged by each.

Indian Institute of Technology (IIT) Kharagpur Kharagpur 69,000
Indian Institute of Technology Bombay Mumbai 43,126
Madras Institute of Technology Chennai 45,220
Anna University Chennai 46,470
LD College of Engineering Ahmedabad 4,575
Gujarat Technological University Ahmedabad 90,000
Cochin University of Science and Technology Kochi 51,680
Hindustan University Chennai 80,750
University College of Science, Technology & Agriculture Kolkata 4,658
Mahatma Gandhi University Chennai 65,000
Birla Institute of Technology, Mesra Ranchi 187,000
Amity University Noida 72,000
I.K. Gujral Punjab Technical University Jalandhar 76,550
University of Chhattisgarh Raipur -

Eligibility for M.Tech. in Rubber Technology

Candidates wishing to apply for the course need to meet the following minimum criteria of eligibility:

  • A minimum aggregate score of 55% at the level of graduation in B.E./ B. Tech. or equivalent subject in a relevant discipline, completed from a recognized institute. (For IITs and UPES, the minimum percentage required is 60% at the level of graduation).
  • A Bachelor’s Degree in any of the relevant engineering fields such as Production Engineering, Production Engineering and Management, Production and Industrial Engineering, Rubber Technology, Plastic and Rubber Technology, Computer Applications, Textile Engineering and Fibre Science and Engineering, and Mechanical Engineering.
  • Candidates with M.Sc. degree in Chemistry or Applied Chemistry with minimum 55% marks in aggregate can also apply.
  • Candidates awaiting their final year exam’s results can also apply on provisional basis. Admission is subsequently confirmed on the basis of performance at the level of graduation.

Many institutes prefer students with professional experience, therefore, it is advised for candidates to acquire a work experience of a minimum of 24 months. Also, candidates with two years of relevant work experience are exempted from appearing in GATE, provided their candidature is sponsored by the employer.

M.Tech. in Rubber Technology: Admission Process

Eligible candidates are required to qualify a relevant entrance examination followed by a round of group discussion. Subsequently, qualifying candidates are needed to go through additional rounds of personal interview as the final stage in the process of selection. The main entrance exam held in India for admission to the course is GATE (Graduate Aptitude Test in Engineering).

GATE is an All-India examination conducted jointly by the Indian Institute of Science (IISc), Bangalore and seven Indian Institutes of Technology (IITs). The entrance exam is primarily held for admission to post graduate courses in the field of engineering, technology, architecture and science.

The online test is a multiple- choice and numerical- type exam divided into three sections, namely General Aptitude, Engineering Mathematics and the specialty subject.

However, a few colleges such as Tamil Nadu Common Entrance Test (TANCET) for Madras Institute of Technology, Chennai, also have their own entrance examinations such as Manipal Institute of Technology and UPES (written tests and interview), and admission procedures in place for selecting and admitting candidates.

M.Tech. in Rubber Technology: Syllabus and Course Description

A semester- wise breakup of the course’s syllabus is tabulated below:


Industrial Rubber
Rubbers Compounding & Reinforcing Materials
Elective I
Elective II
Elective III
Rubber Laboratory I
Seminar I


Rubber Product Manufacturing Technology
Industrial Rubber II
Elective IV
Elective V
Elective VI
Rubber Laboratory - II
Seminar – II
Comprehensive Viva Voce


Thesis -Part I


Thesis -Part II


Basic Rubber Science
Adhesion Science and Technology
Characterization of rubber and rubber- like materials
Computer Programming
Computer Software
Engineering Design with Rubber
Engineering Mathematics
Introduction to programming and Date Structure
Latex and Foam Technology
Physical Testing of Rubber
Polymer Reaction Engineering and Reactor Design
Recent Advances in Rubber Technology
Rheology & Processing of Rubbers
Rubber Processing Principles
Tyre Technology

M.Tech. in Rubber Technology: Career Prospects

Successful postgraduates of the course are lucratively hired in both public and private sectors, in tyre companies, agricultural industry, automobile industry, transportation companies, construction firms, artificial limbs manufacture industries, rubber plants, and so on.

Some of the popular professional avenues open to such postgraduates are listed below with the corresponding salaries offered for the respective positions.

Master of Technology in Rubber Technology
Rubber Technical Engineer To develop new rubber and polymer products and work towards the continual improvement of existing products to cater to the needs of customers. To control the complete development cycle of a product from conceptualization to prototyping, testing and bulk manufacture. To entail production process control and supervision of quality control of existing rubber and polymer products and to work with in-house and external tool-rooms and vendors for development of tools, dies, and subcomponents of products under development. 4 to 9 Lacs
Rubber Technologist To economically formulate different types of rubber compounds that satisfy product and customer requirements. To modify existing compounds to rectify quality- related problems, to ensure cost-effectiveness in order to meet customer requirements, and to handle the processing of rubber technology, rubber compounding, rubber mixing, monitoring and control while testing raw materials as per standards, and perform field- evaluation of products. 4 to 8 Lacs
Production Engineer To improve the process of product- manufacture, such as food and drink, rubber material, plastics and pharmaceuticals. To work with technicians wherein one has to develop, install, procure and maintain the equipment used in the manufacturing process. 3 to 7 Lacs
Maintenance Engineer To undertake scheduled and breakdown maintenance of engineering equipment or plants ensuring that industrial machinery and equipment run smoothly and reliably. To improve production facilities, reduce incidents of costly breakdowns and develop strategies to improve overall reliability and safety of the plant, personnel and production processes. 3 to 9 Lacs
Molding Process Engineer To ensure that molds are running optimally by monitoring and tuning molding processes, suggesting part, material, equipment and tool modifications, developing corrective actions and training plastics technicians and to provide day- to- day supervision of plastics personnel. 4 to 9 Lacs
Polymer Specialist To research and study the structures and chemical properties of various natural, synthetic or composite materials, including metals, alloys, rubber, ceramics, semiconductors, polymers, and glass, and to determine ways to strengthen or combine materials or develop new materials with new or specific properties for use in a variety of products and applications. 3 to 8 Lacs
Lecturer/Professor To teach at undergraduate and graduate levels in areas related to Rubber Technology and its applications, allocated by and reviewed from time to time by the Head of Department, and to supervise or assist with supervision of undergraduate, taught graduate (Masters) or research graduate (MPhil/PhD) students. 3 to 7 Lacs

Master of Technology [M.Tech] (Rubber Technology) Fee Structure in India

9.35 K (Minimum Fee)PUBLIC COLLEGES4.43 L  (Maximum Fee)
1.91 L (Average Fee)
1 L (Minimum Fee)Private COLLEGES1 L (Maximum Fee)
1 L (Average Fee)


No Comments To Show

Master of Technology [M.Tech] (Rubber Technology) Colleges IN INDIA

View All
2.32 L first year fees
Anna University - [AU]
Chennai, Tamil Nadu
60 K first year fees
50 K first year fees
5.73 K first year fees