Bachelor of Technology (B.Tech.) in Plastic Technology Distance Education, Syllabus and Salary

Sakshi Gupta's profile photo

Sakshi Gupta

Content Curator | Updated on - Sep 7, 2021

B.Tech. in Plastic Technology is a 4-year undergraduate program offered by universities/institutes in the field of plastic technology. Candidates who have successfully completed their 10+2 or equivalent education in science stream can apply for this course.

Top Institutes offering this course are:

Admissions to B.Tech. in Plastic Technology can be obtained through entrance examination that is conducted on national, state or institute level. The candidates are required to study subjects such as polymer physics and rubber compounding. The average fee for the course is INR 75,000, It is relatively less for government institutes. Candidates applying for the course must have an extensive knowledge of basic chemistry.

The plastics industry has generated a large of employment opportunities in every sector of the economy. The average salary for plastic technology engineer is INR 3,00,000.

B.Tech in Plastic Technology: Course Highlights Table

Name of the course Bachelor of Technology in Plastic Technology (B. Tech in Plastic Technology)
Duration Four years
Stream Plastic Technology
Average course fee INR 75,000/annum
Sectors of employments Plastic Production Industry
Average entry level salary INR 300,000/annum
Top entrance exams IIT JEE, MH CET, TNEA

B.Tech in Plastic Technology: What is it About?

B. Tech in Plastic Technology is an undergraduate program that requires four years for completion. Plastics engineering encompasses the processing, design, development, and manufacture of plastics products.

Plastic technology also includes an application of the basic principles of engineering in order to produce plastic products by assisting and guiding engineers and other professionals.

Candidates are taught to consider outdoor weather ability, thermal properties such as upper use temperature, electrical properties, barrier properties, and resistance to chemical attack. Bachelor of engineering in rubber and plastic technology is a course similar to this one.

Duration

Bachelor of Technology in Plastic Technology is an undergraduate course that requires four years for completion in total. It comprises of eight semesters and an examination is held at the end of each semester.

B. Tech in Plastic Technology: Top Institutes 

List of top institutes/universities offering B.Tech in Plastic Technology along with their annual fee is given below:

Eligibility for B. Tech in Plastic Technology

The candidate applying for the course must complete 10+2/equivalent examination with minimum 55% aggregate in PCM/PCB. The candidates who have completed a diploma in plastic technology or plastic mold technology can also apply for this course through lateral entry. Along with these requirements, the candidates are to appear for entrance examinations to get admitted into carpet and textile technology course.

B. Tech in Plastic Technology: Admission Process

The admission processes vary from institute to institute and/or state to state. Most of the colleges require the candidate to qualify an entrance examination. Candidates who are currently appearing or have completed 10+2 or equivalent examination are eligible to appear for these entrance examinations.

IITJEE Mains

JEE Main is an all India common engineering entrance examination of the objective pattern which is led for admission in engineering colleges and courses all over the country. It is thought of as one of the most challenging engineering admission tests.

JEE mains score is used by almost all the engineering colleges across India. IITJEE mains entrance examination for B.Tech and B.E. (Paper I) has objective type questions with equal weightage to Mathematics, Chemistry, and Physics.

MH CET- MH CET is conducted for admission to engineering and health science courses. MH CET score can be used to obtain admissions in engineering colleges in Maharashtra.

The subject-wise distribution of marks is given below in the table

Subject Marks
Physics 50
Biology 100
Chemistry 50
Mathematics 100

TNEA- Anna University conducts Tamil Nadu Engineering Admissions (TNEA) to allow admissions to candidates in different engineering colleges in the state of Tamil Nadu. The merit list for this entrance exam is created on the basis of Class 12 score scaled to 200. TNEA rank list is used to offer admissions in undergraduate programs such as Bachelors of Engineering (BE) and Bachelors of Technology (B.Tech) in colleges of Tamil Nadu.

Direct admissions

Direct admission through management quota is offered by almost all the colleges. Government engineering colleges do not offer direct admission due to the absence of management quota.

Lateral entry

The candidates having a diploma in plastic technology course and plastic molding technology can get admission into B.Tech Plastic Technology course through lateral entry. The candidates are provided admission in the course directly from the third semester.

Distance Learning

A distance learning course for Bachelor of Technology in Plastic Technology is available at Neptune Institute of Management and Technology (NIMT).

The course details in the distance learning mode is given below:

Course Duration Fast-Track 12 Months
Duration Normal 12 Months
Semester/Year/Session 2 Sessions
Course Fee INR 18,350/Session
Exam Fee INR 1,250/Session
Study Material Fee INR 2500/Session
Eligibility Diploma/10+2

B. Tech in Plastic Technology Course Structure and Syllabus

Bachelor of Technology in Metallurgical Engineering is a four-year program which encompasses of total eight semesters. And an examination is held at the end of each semester. Candidates are required to put forward and implement a project at the end of the curriculum in order to complete the course successfully. Projects are to be implemented in groups. Candidates are also given a set of electives to choose from during the last two semesters, these electives give a proper direction in terms of specialization. The course structure of the program varies from college to college.

Semester I Semester II
 Mathematics – I Engineering Sciences Course Mathematics-II Engineering Sciences Course
Engineering Physics – I  Engineering Sciences Course Engineering Physics-II Engineering Sciences Course
Engineering Chemistry– I  Engineering Sciences Course Engineering Chemistry-II Engineering Sciences Course
Computer Programming Engineering Sciences Course Basic Electrical and Electronics Engineering Engineering Sciences Course
- - Engineering Mechanics Engineering Sciences Course
Semester III Semester IV
Environmental Science and Engineering Engineering Sciences Course Mold Manufacturing Engineering  Core Course
Materials Engineering  Core Course Polymer Structure and Property Relationship Core Course
Organic Chemistry and Technology Core Course Principles of Chemical Engineering  Core Course
Strength of Materials Core Course Physical Chemistry of Polymers  Core Course
- - Plastics Materials and Applications I Core Course
Semester V Semester IV
Polymer Rheology Core Course Fundamentals of Plastics Mold and Die Design Core Course
Polymerization Engineering Core Course Rubber Technology Core Course
CAD/CAM/CAE for Plastics Engineering Core Course Plastics Testing Techniques I Core Course
Plastics Materials & Applications II Core Course Process Control & Instrumentation Core Course
Plastics Processing Technology – I Core Course Additives and Compounding Core Course
- - Plastics Processing Technology II Core Course
Semester VII Semester VIII
Polymer Composites Technology Core Course Polymer Nanocomposites, Adhesives and Surface Coatings, Biomedical Plastics Elective Courses
Plastics Testing Techniques – II Core Course Statistical Quality Control Techniques Total Quality Management, Professional Ethics in Engineering Elective Courses
Industrial Management & Costing Core Course - -
 Plastics Product Design Core Course - -
Plastic Waste Management and Recycling Techniques, Plastics Packaging Technology, Fiber Technology Elective Courses - -
Biodegradable Polymers, Specialty Polymers Polyurethane Technology Elective Courses - -

Who should opt for B. Tech in Plastic Technology?

Candidates with keen interest in plastics and materials science aspects such as scientific principles of fabrication should opt for this course. The course is apt for those interested in gaining in-depth knowledge about various processes that include injection molding.

Candidate having an extensive amount of knowledge in physics and chemistry along with skills like critical thinking and problem-solving mindset can attain excellence in this field.

B. Tech in Plastic Technology Career Prospects

Plastic engineers deal with plastic materials as well as plastic machinery. Plastic machinery entail devices, tools, and machines used to make plastic products. Like most engineering disciplines, in plastic engineering, economics plays an important role. List of a few industries employing plastic engineers are given below:

  • Kingfa Science & Technology Ltd
  • Arrow Coated Products Ltd
  • Wim Plast Ltd
  • VIP Industries Ltd
  • Nilkamal Ltd
  • Mayur Uniquoters Ltd
  • Responsive Industries Ltd
  • Jain Irrigation Systems Ltd.

The job profiles along with their description is given below

Job Profiles Description
Project Engineer A project engineer's responsibilities include schedule preparation, pre-planning and resource forecasting for engineering and other technical activities relating to the project.
Research Assistant A research assistant is a researcher employed, often on a temporary contract, by a university or a research institute, for the purpose of assisting in academic research.
Assistant Engineers Under general supervision, performs routine to moderately difficult professional engineering work in the research, design, and construction of capital improvement programs, major maintenance programs and general services.

The average salary of the candidate in various job profiles is given below

B.Tech in Plastic Technology

Job Avg. Salary/Annum
Project Engineer INR 341,900
Research Assistant INR 301,500 
Assistant Engineer INR 332,700 

Bachelor of Technology [B.Tech] (Plastic Technology) : 38 answered questions

VIEW ALL

Ques. How is metallurgical and materials engineering at IIT Ropar?

● Top Answer By Aaditya Hari Nair on 07 Sept 21

Ans. Metallurgical and Materials Engineering Department at IIT Ropar offers a B.Tech program, alongside a Ph.D. program. Since the establishment of the branch, it has involved a wide range of study areas, in India as well as other foreign countries. Mainly, it has shown a great scope of exposure relentlessly in these few years. Sir P.K Raina, considered one of the main heads of the institute, is a Ph.D. holder from IIT Kanpur and knows how to incentivize new talents. At present, he is known as the Students Associate Dean of IIT Ropar.  In terms of infrastructure, there is a separate building in the permanent campus, usually called the Satish Dhawan for SMMEE. There is a provision of only one lab located in the Transit campus - 1 of XRD. Other similar labs are located elsewhere, RMML (Ropar Machines of Materials Laboratory ) Material Testing Lab In case you are about to pursue your higher studies, then going for IIT Ropar is not at all a bad elective. Read more
0
0
1 Answer
●●●

Ques. Should I go for civil engineering or metallurgy and material science engineering in NIT Trichy?

● Top Answer By Aaditya Hari Nair on 31 Aug 21

Ans. I would suggest you go for metallurgy if you plan to do a job right after completing your degree. Metallurgy has more job opportunities to offer. With Metallurgy, you can easily learn coding and go for tech companies. NIT Trichy has a great coding culture, so picking up coding skills will not be difficult.  If you plan to prepare for civil services or any other government job, I would suggest you go for civil engineering. When compared to metallurgy, there are fewer job opportunities in the civil department. If you plan on doing an MBA after having done your engineering, you can opt for either of them because then it does not matter anyway.Read more
0
0
1 Answer
●●●

Ques. What is the current placement scenario for metallurgy and materials engineering at NIT Trichy?

● Top Answer By Aaditya Hari Nair on 30 Aug 21

Ans. One of my friends graduated from NIT Trichy and here are some facts about the institute I got to know from her. As you have not mentioned any specifications, let me just describe the placement scenario of Metallurgy at NIT Trichy. The placements generally vary from year to year.  Out of a batch of around 60 students, people looking for placements every year is around 40. The rest of the people either go for higher studies or have some other plans.  Most of the people get into material science-related fields at very good universities. Out of the 40 students, around 30 usually get placed.  Companies that usually open for metallurgy graduates include, Core Metal (steel/ aluminium), Automobile, Analytics, Software and others. There are a few companies that are regular visitors. The rest depends on the market and your training placement coordinator. Placements for metallurgy students are lesser than the other departments. Categories Metallurgy and Materials Engineering at NIT Trichy Course Fee 5.65 lakh Highest CTC 22 LPA Average CTC 10-12 LPA Recruiting Companies BPCL, L&T, Tata Steel, Reliance, etc. So, you need to act upon those selected shots you get. You'll have many chances throughout the year. You will also get a lot of guidance from immediate seniors.Read more
0
0
1 Answer
●●●

Ques. How is NIT Calicut for a B.Tech in material science?

● Top Answer By Aaditya Hari Nair on 26 Aug 21

Ans. B.Tech in material science in NIT CALICUT is a slightly underrated course as it is newly introduced. NIT Calicut also has an M.Tech course for material science.  The material science branch in NIT Calicut is a very promising branch despite being an underrated and newly introduced branch and has become an important part of NIT Calicut. This branch also has a dedicated department for nanotechnology. Recently they have made their college proud by preparing and distributing hand sanitizer in the entire campus and also in local sections of society to fight against the coronavirus pandemic.  The placements of this department are not as great as in the computer science department as it is a newly introduced branch.  This is a research-oriented branch with a strong alumni network. Material Science is definitely a promising field and offers a lot of opportunities in higher studies. If you love nanoscience then you should go for this course. Read more
0
0
1 Answer
●●●

Ques. Which is better, metallurgy at NIT Warangal or an MSc in Biology at BITS Goa?

● Top Answer By Aaditya Hari Nair on 24 Aug 21

Ans. One of my cousins recently encountered a similar situation where she had to choose between an M.Sc in Chemistry at BITS Hyderabad, and Biotechnology at NIT Warangal.  Having a conversation with the seniors, she found out that placements at NIT Warangal for Biotechnology, Metallurgy, Civil, and Chemical, are not as good as they should be. The recruiters are a handful, like Dr. Reddy’s, who recruit a few students out of many. Most of the students begin preparing for CAT or GRE during their 3rd and 4th year of the course. The ECE placements are quite reasonable. This means, the median package for circuit branches in BPHC can range anywhere from around 10 LPA to 11 LPA, while the average package can still be higher.  However, Metallurgy will not supposedly bring as many prospects as other branches can. It can pose a real problem in your case. You can choose to pursue an MBA or opt to study abroad for an MS.  But, M.Sc in Biology at BITS Goa can possibly be a good choice because you will still secure a position in EEE, ECE, or ENI. It can fetch you a position in the IT sector. The placements between BITS Pilani and BITS Goa are almost in the same range, with little to no difference at all. Only recently, there are candidates who went abroad to MIT or Caltech after their M.Sc, to pursue their thesis. It can make an easy dodge for you to secure seats in MS or Ph.D. programs. Thus, going for BITS Goa can be a superior choice to the NIT Warangal. Read more
0
0
1 Answer
●●●

Bachelor of Technology [B.Tech] (Plastic Technology) Fee Structure in India


1.23 L (Minimum Fee)PUBLIC COLLEGES3.11 L  (Maximum Fee)
2.17 L (Average Fee)
5.17 L (Minimum Fee)Private COLLEGES5.40 L (Maximum Fee)
5.28 L (Average Fee)

Reviews

Filter By
CollegesBatch
SORT BY :
Relevance

CIPET- Institute Of Plastics Technology - [IPT] (3)
Central Institute of Plastics Engineering and Technology - [CIPET] (3)
Placement (6)
Campus (5)
Hostel (5)
Fee Structure (3)
Government (3)
Internship (3)
Package (3)
Plastic (3)
Scholarship (3)
Chance (2)
Course (2)
Course Curriculum (2)
Engineering (2)
Faculty (2)
Jee Main (2)

6 Reviews found out of 177274


SS
7.3 /10

Course Curriculum Overview :

I choose this particular stream because of low competition, high importance and rapidly growing demand in the field of the petroleum industry as well as in a way to control plastic consumption and management. Faculty student's ratio is good and faculties are very responsible. All of them are highly qualified and recognized at the national level and are directly recruited by the central government. The exam is on time and the syllabus is completed on time. Odd sem exams are held in dec 15-30 and even sem are held on mid-April to May.

Internships Opportunities :

There no special internship provided by a college so you have to go out for the industrial experience. You are eligible for an internship from the second year and your marks should be more than just 40% every last year. If you have done an internship in foreign countries like Germany, Japan, and Canada you have a really high chance to get a very good placement.

Placement Experience :

After 7th-semester students are eligible for placement. The average placement is of 5 lakhs at Max to 12 lakhs per annum or more. The placement record is more than 85%. The percentage for students to get placement should be more than 60% in all years for the average package. For a good package, your score should be more than. 80%.

report
Read More
MK
8.3 /10

Campus Life :

Campus life is really good. 80:20 ratio of boys and girls. there is table tennis court, badminton court, volleyball court for sports. while for industrial knowledge carpentry shop, plastics processing shop, computer labs, e-library available. as it's a engineering college there is no politics or racism. you are also free to follow your religious guidelines.

College Events :

Annual function ANANT. Seminar related to plastics material processing and testing, AutoCAD, pro-e. our college it's annual function each n every year for farewell of last year students. each year 2-3 seminars happens in our college. Plast India is a big seminar happens once in 3 years. students got free entry for it.

Placement Experience :

100% placement college, starting package is low, but just after 1-2 year experience you will get good amount. M. N. C companies like M. M. D. L GURGAON, LOHIA STARLINGER KANPUR, VECTUS PIPE, PRINCE PIPE and many more. college faculty also helps for 4 week internship after 2nd & 3rd year.

report
Read More
SS
7.2 /10

Admission :

I opted for this college because I'm an average student and this college seemed an ideal college for me. Factors: stream I chose was slightly unique and has low competition and a high chance of placement or to start a business/startup in the related field. Placement is average but the course curriculum is good, faculty is cooperative. And if you want to study further then you should know that most of the students crack GATE as an academic result is good.

Course Curriculum Overview :

There are two courses taught here 1. Plastic Engineering (PE) 2. Manufacturing technology (MT) in which MT is a harder but better chance of getting a decent job than PE. As per the curriculum, it is good as faculty really is serious and strict besides one or two and looks forward to your academic growth. The course is structured by AKTU for BTech so it has to be a bit messed up but you will not face any difficulty.

Loan/ Scholarship Provisions :

There is a SCHOLARSHIP provided by up govt and there is a high 95% chance for you to get it. Only if you are alert. Eligibility is you/your parents should have a domicile certificate of UP. Family income should not be more than 2.5 lakhs per annum i.e. income certificate of anyone in the family. 10/12 mark sheet and other documents. If there is a problem then ask your seniors they will surely help.

report
Read More
AR
8.3 /10

Alumni/Alumna :

All the seniors are being kind to us and treat us as the similar friends group person which encourages to do friendships with others and give an positive atmosphere in the college which is being good for us. The seniors may share their experiences to us and gives suggestions for the preparation for exams.

Remarks :

Some of the equipment in class rooms are being not wirking properly and in some of the classes the air conditioner is not working, also last year question papper are bing not available on the college or university website due to change in syllabus.

College Events :

Every year the Tech- fest, sports championship and annual day are being organised by the college, also other activities are being celebrated as quiz and many other activities are organized by students which gives different enthusiasm to students.

report
Read More

Comments



No Comments To Show

Bachelor of Technology [B.Tech] (Plastic Technology) Colleges IN INDIA

View All
1.35 L first year fees
VIEW ALL COURSES & FEES
3.11 L Total fees
VIEW ALL COURSES & FEES