Jawahar Nehru Technical University, Kakinada or JNTUK is a technical university that offers admissions to M.Tech program which has a duration of 2 years. The M.Tech aspirants can go through the course detail given below before applying. 

  • The M.Tech program has several specializations like Computer Science engineering, Civil Engineering, Biomedical Engineering, Chemical Engineering, Biotechnology, Electronics & Communications Engineering, Environmental Science and Engineering, Food Process Engineering, Information Technology, Infrastructure Engineering and Construction Management, Instrumentation and Control Engineering, Mechanical Engineering Design, Petroleum Engineering, Pipeline Engineering, Power System Engineering, Transportation Engineering, Astronomy & Space Engineering etc
  • The course consists of 4 semesters, 2 in each year.
  • The application process is done entirely online on their official website.
  • Admissions to the M.Tech course is provided based on entrance examinations like GATE and AP PGECET.
  • Jawahar Nehru Technical University, Kakinada or JNTUK ranked 97 for engineering by NIRF 2020.

JNTUK M.Tech Eligibility Criteria

The candidates should have the following eligibility criteria:

  • The candidates should have completed graduation (B.Tech) with at least 50 % marks. 
  • The university selects candidates for M.Tech based on GATE and AP PGECET rating.

JNTUK M.Tech Admission Guidelines 2020

Admissions to the M.Tech course is provided based on entrance examinations like GATE and AP PGECET. The steps required to apply for the M.Tech programme at JNTUK are as follows:

The candidates should visit the official website.

  • Go to the ‘registration tab,’ 
  • Fill the detail such as PGECET roll number, DOB, asked there
  • In the next step, you need to pay the application fee of INR 550 for all categories. 
  • After making the fee payment, the candidates get redirected to the page where they need to fill in the details and submission of required documents/photos (photo, signature). 
  • The candidate should submit and take out a print of the application form. 

The aspirants should have the eligibility for M.Tech before they apply. The candidates should have completed the B.Tech programme before applying. 

Read More:  JNTUK Admission 2020

JNTUK M.Tech Course Details

The M.Tech programme has a total duration of two years. The eligibility to study this programme is that the student must have obtained a B Tech degree (Civil Engineering/ Mechanical Engineering/ Electronics/ Electrical Engineering/ Computer Science/ Nuclear Engineering with at least 50% along with AP PGECET score.

The Specializations of the M-Tech programme offered by the university includes:

  • Computer Science engineering
  • Civil Engineering, Biomedical Engineering
  • Chemical Engineering, Biotechnology
  • Electronics & Communications Engineering
  • Environmental Science and Engineering
  • Food Process Engineering
  • Information Technology
  • Infrastructure Engineering and Construction Management
  • Instrumentation and Control Engineering
  • Mechanical Engineering Design
  • Petroleum Engineering
  • Pipeline Engineering
  • Power System Engineering
  • Transportation Engineering
  • Astronomy & Space Engineering

The course consists of 4 semesters, 2 in each year.

JNTUK M.Tech Syllabus

The syllabus for various specializations of M.Tech are as follows:

Chemical Engineering CO2 Separation Using Advanced Separation Techniques Development of synthetic polymer?fly ash composites. Techno-economic analysis of geothermal solar hybrid desalination system. Computational fluid dynamics study of multi?phase flow in a colloid system. Development of low cost nano material for Phosphorus Removal and Recovery.  Civil Engineering Development of 6D Energy Model by Application of BIM Application of BIM as a tool of Sustainable Development Project risk Management of Solar Power Parks Application of Internet of Things (IoT) for Project Monitoring Integrated BIM based IoT Model for Asset Monitoring of Infrastructure Projects Electrical Engineering Optimal control of distributed generators in modern power system Multi-objective optimization based model predictive control: Application in power system Optimal sizing and placement of distributed generators in distribution network State estimation techniques: Application in power system Inertial Emulation from Wind Turbine Generating Systems
Energy Systems Thermal management modeling and systems for lithium ion batteries. Industrial pollution effect on solar photovoltaic module performance Potential Induced Degradation of photovoltaic modules and their remedy Feasibility of Solar based Battery Swapping Station Effect of inverter temperature over photovoltaic plant performance.  Environmental Engineering Understanding air pollution around landfill site: a source apportionment and receptor modeling approach Understanding soil pollution around landfill site using receptor modeling approach Plastic waste utilization as construction material Manufacturing of new construction material for reducing ambient air pollution Technovations in treating wastewater with nano fiber and grafted polymer Mechanical Engineering Use of regression and clustering algorithms for wind-solar resource assessment Numerical modeling of 3D/4D composite plate subjected to Ballistic Impact Loading Progressive Damage modeling of Structure in Blast Loading Experimental and numerical Investigation on Tensile Behavior of a Plate containing multiple holes Composite based Design and Development of Bio-inspired Armors Experimental Investigation of Tensile Behavior of Additive Manufactured Plates Optimization of additive manufacturing processes parameters using machine learning 
Petroleum Engineering Petro physical characterization and Pore network modeling of Heterogeneous reservoirs MEOR Study on Methane storage in Gas Hydrates Heavy Oil reservoir Management Understanding Wellbore stability using pore pressure prediction from seismic and well log - -

JNTUK M.Tech Placement

The university conducts campus placement drives. Those who achieve 60% marks in M.Tech can sit in the placement drive. The university has a high record of placements, and almost 70% of the students get hired by the big companies. The top hiring companies at JNTUK are as follows:

TCS L&T Cognizant
Infosys Tech Mahindra State Bank of India

JNTUK M-Tech FAQs

Ques. In how many specializations do JNTU Kakinada provide M.Tech?

Ans. The technical university of Kakinada provides M.tech in 82 specializations. 

Ques. What is the average salary package for M.Tech holders from this university?

Ans. The candidates having M.Tech from this university get placed in large companies, and the average salary package is five lakhs per annum. 

Ques. How many specializations are offered by JNTUK for the M.Tech Program?

Ans. Jawahar Nehru Technical University, Kakinada or JNTUK offers around 15 specializations in the M.Tech Program.

Ques. Does the university provide good placement training for the M.Tech programme?

Ans. Yes, the university has appointed a team to conduct the training to ensure maximum placements. 

Ques. What is the full form of PGECET that is required to secure admissions to the M-Tech programme?

Ans. The full form of AP PGECET in ‘Andhra Pradesh Post Graduate Engineering Common Entrance Test’.