Master of Engineering [ME] (Manufacturing Engineering) Top Colleges, Syllabus, Scope and Salary

Pranjal Singhal's profile photo

Pranjal Singhal

Content Curator

M.E. Manufacturing Engineering is a 2 year Post Graduate course in engineering with a specialization in the domain of manufacturing and its related areas. A minimum of 50% (relaxable for reserved category candidates) marks at UG level is the least which almost all the institutes desire from applying candidates as an eligibility criterion.

Some of the popular colleges offering the course are:

The fee for the course varies between INR 50,000 to 3, 75,000 in India. The variation in fee is based on the location and nature of university (that is government, state/private/deemed etc.).

M.E. Manufacturing Engineering admissions are done on the basis of Common Entrance Test (CET) selection method as well as merit-based selection criteria that is the percentage of marks obtained at Under Graduate (UG) level. Most of the colleges who provide admissions through CET mechanism rely on the score of All India level common entrance exams like GATE (Graduate Aptitude Test for Engineering), IIST PG while a select few opt for a separate entrance exam of their own (Like BITSAT HD).

The course is designed to dissipate domain-specific skills and knowledge to the PG level students so as to equip them with a holistic knowledge of the subject that will enable them to take on the day to day challenges that would come in the persecution of their skill at the industry level.

M.E. Manufacturing Engineering postgraduates have a wide range of job opportunities like Production engineer, Mechanical analyst, Project in charge, Researcher, Content developer etc. After completion of post graduation, one may pursue further studies like M.Phil and Ph.D. in the said subject or may take up job opportunities associated. The average salary ranges between INR 12,000 and 18,000 a month for a fresh pass out.

M.E. Manufacturing Engineering: Course Highlights

Course Level Post Graduate
Duration of the Course 2 years
Examination Type Semester-wise
Eligibility Minimum score of 50% (Relaxable for reserved category students) marks at UG level.
Admission Process Entrance exam based/Merit-based
Course Fee Between INR 50,000 to 3.75 Lacs
Average Starting Salary INR 12,000 to 18,000
Top Recruiting Companies Tata Motors, BEL, Honda, Steel India, HINDALCO, NALCO
Job Position Production engineer, Mechanical analyst, Project in charge, Researcher, Content developer etc

M.E. Manufacturing Engineering: What is it about?

Manufacturing happens to be the backbone of any economy. All the economic activities are dependent upon the productivity and efficiency of the manufacturing firms in the country. Thus, it can be said as the base over which all other sectors of economy thrive.

The process of manufacturing involves technical skills and academic soundness with production process so as to bring the best out of the available resource base. The basic fundamental of manufacturing is to produce maximum with available inputs. This can be done only by trained and qualified manpower and not novice.

A master’s course in manufacturing engineering provides that required skills and academic knowledge to the students that would turn them into trained manpower. The course through various subjects and practical knowledge try to inculcate these qualities among students in a gradual manner.

M.E. Manufacturing Engineering:Top Institutes 

The course is offered by many reputed colleges/universities to candidates who have passed their UG or equivalent examination from a recognized state or central University.

Students can take admission in the course through Common Entrance Test conducted by certain exam conducting authorities such as IITs, IIIT, as well as separate exams conducted by respective colleges/Universities (Like BITS) that are offering this course.

For your reference, we have tabled down a list of various colleges/universities that are offering this course in India.

Institute City Average Fee Per annum basis
Anna University Chennai INR 46,470
IIT Chennai/Madras INR 35,500
KLN College of Engineering Sivagangai INR 45,000
PES Institute of Technology Bangalore INR 3,00,000
NSIT Delhi INR 1,15,000
Bethlehem Institute of Engineering Kanyakumari INR 68,750
Christian College of Engineering and Technology Dindigul INR 52,000
CMS College of Engineering Namakkal INR 45, 220
CSIIT Thovalai INR 96, 220
Dr. Pauls Engineering College Villupurum INR 65,000

M.E. Manufacturing Engineering: Eligibility

Candidate must have passed the B.E/B.Tech or equivalent examination in the respective stream from a recognized state/private/deemed or central University with at least 50% (relaxable for reserved category candidates) of the marks.

  • He/She shall not be having any backlog or compartment in any of the Subject/Subjects at UG level that is yet to be cleared at the time of taking admissions.
  • Apart from the above-mentioned eligibility criteria’s various colleges and institutes may have their own additional criteria’s which the students would have to satisfy in order to take admission (like work experience of certain years).
  • In case of reserved category students, they would have to present their reservation certificates issued by the competent authorities in order to avail the benefits applicable to them.
  • Most of the Institute give admissions through Common Entrance Test (CET) (like GATE). To get admissions in these institutes candidates would have to qualify the respective entrance exam by securing minimum qualifying marks.

The eligibility criteria’s mentioned above are common for most of the universities and colleges across the country that are offering this course to the students.

M.E. Manufacturing Engineering: Admission Process

M.E. Manufacturing Engineering course admission process involves a common entrance test based admission process (as seen across various universities and colleges in the country). 

  • Most of the Universities/Colleges conduct a common entrance test for admission into M.E courses (like BITSAT HD) or take admissions through commonly held entrance exam like GATE. Hence students would have to make an application for such exams.
  • Students have to qualify these exams (for which they should be eligible to appear) in order to get admission in the course.
  • After the conduct of the test, a merit list of finally qualified candidates is prepared and candidates are invited for admission process by the respective university or college.
  • After admission process final allotment of seats to the candidate takes place and the candidate is asked to deposit the fee for the course and register for the respective academic year.

Admission process would more or less be same across all the colleges and universities that are offering this course.

M.E. Manufacturing Engineering: Syllabus and Course description

The syllabus of the course is divided into four semesters spread over a span of two years. M.E. Manufacturing Engineering syllabus is divided into various subjects and practical skills that students are taught during the course of their post-graduation.

The details regarding the syllabus of the course are mentioned below so as to provide a reference to the candidates.

Semester I Semester II
Applied Probability and Statistics Optimization Techniques in Manufacturing
Advanced Material Technology Manufacturing Metrology and Quality Engineering
Auto CAD integrated Manufacturing Systems Theory of Metal Forming
Robot design and Programming MEMS and Nanotechnology
Elective 1 Elective 2
Practical Practical
Semester III Semester IV
Material management Final Year Project
Industrial Ergonomics Elective 3
Polymer and Composite Materials Elective 4
Non-Destructive Evaluation Nanotechnology
Lean Manufacturing Computer Aided Product Design
Quality and Reliability Engineering Practical
Final Year Project -
Practical -

M.E. Manufacturing Engineering: Who Should Opt for?

  • Students who have a background in Mechanical Engineering.
  • Those who have a career as Production Manager in Mind.
  • Those who are aiming at public sector jobs.
  • Those aiming at higher studies in the domain can opt for the course.

M.E. Manufacturing Engineering: Career Prospects

Manufacturing Engineering postgraduates have plenty of options to choose from in terms of their career. One can choose to work with companies such as Tata Motors, BEL, Honda, Steel India, HINDALCO, NALCO etc.

To provide you a complete view of the career prospects of the course we have tabled certain areas and the respective roles attached to the same where Manufacturing engineering postgraduates can look for in terms of their career.

Master of Engineering [ME] (Manufacturing Engineering) annual salary
Job Profile Role Average Salary for Fresher’s
Production Engineer Production engineers are engaged in overall management and smooth functioning of product’s production cycle. INR 2.55-2.93 Lacs
Mechanical analyst The job of a mechanical analyst involves inspection or detection of any flaws or dents in the manufactured product. INR 2.86-3.35 Lacs
Quality Engineer The job involves one to ensure that standards of quality and manufacturing are not compromised in the production cycle. INR 2.45 -2.73 Lacs
Project Incharge A project in charge is entrusted with overall team coordination and supervisory duties in regards to a team working on a specified project. INR 2.80-3.4 Lacs
Assistant Controller An assistant controller’s job involves regulation of the assembly line in sync with the advice tendered by a senior controller. INR 2.2-2.52 Lacs

Master of Engineering [ME] (Manufacturing Engineering) Fee Structure in India


17.63 K (Minimum Fee)PUBLIC COLLEGES2.63 L  (Maximum Fee)
1.07 L (Average Fee)
40 K (Minimum Fee)Private COLLEGES2 L (Maximum Fee)
1.06 L (Average Fee)

Master of Engineering [ME] (Manufacturing Engineering) Fee Structure By state


Tamil Nadu

17.63 KPUBLIC COLLEGES2.63 L
1.12 L
40 KPrivate COLLEGES1.74 L
1.01 L

Comments



No Comments To Show

Master of Engineering [ME] (Manufacturing Engineering) Colleges IN INDIA

View All
50 K first year fees
VIEW ALL COURSES & FEES
50 K first year fees
VIEW ALL COURSES & FEES
Annamalai University - [AU]
Chidambaram, Tamil Nadu
NCTE
56.26 K Total fees
VIEW ALL COURSES & FEES
1.03 L first year fees
VIEW ALL COURSES & FEES
50 K first year fees
VIEW ALL COURSES & FEES
Anna University - [AU]
Chennai, Tamil Nadu
AICTE
60 K first year fees
VIEW ALL COURSES & FEES
1.33 L first year fees
VIEW ALL COURSES & FEES
30 K first year fees
VIEW ALL COURSES & FEES